HDFwear/en.lproj/Localizable.strings

"首页" = "Home";
"运动" = "Sport";
"设备" = "Equipment";
"我的" = "Mine";
"体重" = "Weight";
"出生日期" = "date of birth";
"男" = "Male";
"女" = "Female";
"性别" = "Gender";
"身高" = "Height ";
"身高说明" = "Height is an important factor in calculating sports health data. In order to ensure the accuracy of the data, please fill in truthfully and track your height regularly. ";
"目标步数说明" = "Based on world Health Organization recommendations, and based on information about your sex, age, height and weight, you need about 8,000 steps a day.";
"体重说明" = "Body weight is an important factor in calculating sports health data. To ensure the accuracy of the data, please fill in truthfully and track your weight regularly. ";
"性别说明" = "Gender is an important factor in calculating exercise health. To ensure the accuracy of data, please choose your gender correctly and it cannot be changed.";
"年龄说明" = "Age is an important factor in calculating sports health. To ensure the accuracy of the data, please fill in your date of birth.";
"确定" = "Confirm";
"取消" = "Cancel ";
"完成" = "Complete";
"保存" = "Save";
"立即体验" = "Experience now";
"上一步 " = "The previous step";
"下一步" = "The next step";
"今日活动" = "Today's Event";
"添加设备" = "Add Device";
"步数" = "Steps";
"距离" = "Distance";
"热量" = "Calories";
"步" = "steps";
"目标步数" = "Target";
"运动时长" = "The movement time";
"消耗热量" = "Consumption quantity of heat";
"平均配速" = "Avg. Pace";
"平均速度" = "Avg. velocity";
"运动步数" = "Exercise steps";
"平均步频" = "Avg. cadence";
"最大步频" = "Max cadence";
"总步数" = "Total steps";
"平均步幅" = "Average stride ";
"千卡" = "kcal";
"公里" = "km";
"米" = "m";
"公里/小时" = "Km/h";
"步/分钟" = "Step/min";
"跑步" = "running";
"户外跑步总距离" = "Total outdoor running distance";
"户外" = "outdoors";
"室内跑步总距离" = "Total indoor running distance";
"步行" = "walking";
"室内" = "indoor ";
"骑行" = "cycling";
"爬山" = "Climbing the mountain";
"步行总距离" = "Total walking distance";
"骑行总距离" = "Total riding distance";
"步行总里程" = "Total walking distance";
"跑步总里程" = "Total running distance";
"骑行总里程" = "Total riding distance";
"爬升总高度" = "Total climb altitude";
"爬山总距离" = "Total climb distance";
"用时" = "time cost ";
"累计消耗(千卡）" = "Cumulative consumption (kcal) ";
"累计用时" = "The cumulative time";
"累计次数(次)" = "Cumulative times (Times)";
"单次最远距离(公里)" = "Single longest distance (km)";
"单次最长用时" = "Maximum single use time";
"单次最高热量(千卡)" = "Single maximum heat (kcal)";
"累计距离(公里)" = "Cumulative distance (km) ";
"跑步记录" = "Running record";
"爬山记录" = "Climbing Record ";
"爬升总高度" = "Total climb height ";
"累计爬升(米)" = "Accumulated climb (m)";
"累计爬升" = "Accumulated climb";
"单次最高爬升" = "Single highest climb";
"单次最高爬升(米)" = "Single highest climb (m)";
"步行记录" = "Walking record";
"骑行记录" = "Riding record";
"累计爬山" = "The cumulative mountain climbing";
"海拔(米)" = "Altitude (m)";
"最高海拔" = "Highest altitude";
"最低海拔" = "the lowest altitude";
"本次运动距离太短，将不保存记录" = "The distance of this exercise is too short, the record will not be saved";
"我知道了" = "I see";
"知道了" = "I see";
"计步" = "Steps";
"近一周达标情况" = "Compliance in recent week";
"步数最多" = "Maximum Steps";
"距离最长" = "Longest Distance";
"热量最高" = "Highest Calories";
"消耗" = "Consume";
"亲，您已超过100%的同类用户" = "Dear, you have more than 100% of similar users";
"亲，您已超过" = "Dear, you have more than ";
"的同类用户" = " of similar users";
"目标完成" = "Goal accomplished";
"去步行" = "To go on foot";
"总步数" = "Total steps";
"血压" = "Blood Pressure";
"血压正常" = "Blood pressure is normal";
"平均收缩压" = "Avg Systolic blood pressure ";
"平均舒张压" = "Avg Diastolic blood pressure";
"毫米汞柱" = "MmHg";
"平均收缩压/舒张压" = "Avg Systolic/Diastolic";
"收缩压" = "Systolic";
"舒张压" = "Diastolic";
"正常血压参考值" = "Normal Blood Pressure Reference Value";
"高血压参考值" = "High Blood Pressure Reference Value";
"低血压参考值" = "Low Blood Pressure Reference Value";
"血氧" = "Blood Oxygen";
"血氧范围" = "Blood Oxygen Range";
"平均血氧" = "Avg Blood Oxygen";
"血氧饱和度(SpO2)参考值" = "Blood oxygen saturation(SpO2) reference value";
"正常" = "Normal ";
"轻度缺氧" = "Mild Hypoxia";
"中度缺氧" = "Moderate Hypoxia";
"重度缺氧" = "Severe Hypoxia";
"心率" = "Heart Rate";
"次/分钟" = "BPM";
"心率范围" = "Range";
"平均心率" = "Average";
"静息心率平均值：60-90次/分钟" = "Average Resting Heart Rate: 60-90 BPM";
"运动心率" = "Exercise Heart Rate";
"热身放松" = "Warm up to relax";
"燃烧脂肪" = "Burning Fat";
"心肺锻炼" = "Cardiopulmonary Exercise";
"耐力强化" = "Endurance Enhancement";
"极限锻炼" = "Extreme Exercise";
"睡眠" = "Sleep";
"浅睡" = "Light";
"深睡" = "Deep";
"清醒" = "Awake";
"时长" = "duration";
"亲，您的睡眠健康指数已击败全国100%的同龄人" = "Dear, your sleep health index has beaten 100% of your peers across the country";
"亲，您的睡眠健康指数已击败全国" = "Dear, your sleep health index has beaten ";
"的同龄人" = " of your peers across the country";
"科学睡眠参考值" = "Scientific Sleep Reference Value";
"平均夜睡睡眠时长" = "Average Sleep Duration Per Night";
"平均深睡比例" = "Average Deep Sleep Ratio";
"平均浅睡比例" = "Average Light Sleep Ratio";
"平均清醒比例" = "Average Awake Ratio";
"平均入睡时间" = "Average Time To Fall Asleep";
"平均起床时间" = "Average Wake Up Time";
"训练" = "Training";
"运动记录" = "Exercise Record";
"女性健康" = "Female Health";
"您的月经大概持续多少天？" = "How many days does your period last?";
"经期天数" = "Menstrual period days";
"两次月经开始日大概间隔多久？" = "How long is the approximate interval between the start of menstruation? ";
"周期长度" = "Cycle length";
"最近一次月经是什么时候？" = "When was the last menstruation?";
"最近一次月经" = "Last menstruation";
"未选择" = "Not selected";
"经期设置" = "Menstrual Setting";
"选择经期天数" = "Select your period days";
"选择周期长度" = "Select menstrual cycle length";
"周期长度没有填哟" = "Please select menstrual cycle length";
"经期天数没有填哟" = "Please select your period days";
"最近一次月经没有填哟" = "Please select the last menstrual date";
"安全期" = "Safety period";
"月经期" = "Menstrual period";
"预测经期" = "Predict menstrual period ";
"易孕期" = "Easy pregnancy";
"排卵日" = "Oviposit day";
"大姨妈来了" = "menstruation is coming ";
"爱爱" = "have sex";
"测量体温" = "Measuring body temperature";
"体温" = "Temperature ";
"经期显示" = "Menstrual";
"分享到" = "share to";
"自定义首页" = "Custom home page";
"暂无数据" = "No Data";
"晴" = "Sunny";
"阴" = "Cloudy";
"雨" = "Rain";
"雪" = "Snow";
"正在同步数据中..." = "Synchronizing Data...";
"正在同步中..." = "Synchronizing Data...";
"设置" = "Setting";
"消耗卡路里" = "Calories consumed";
"总里程" = "Total distance";
"表盘推送" = "Face Gallery";
"正在推送表盘中，请稍后..." = "Pushing watch face, please wait...";
"更多" = "More";
"遥控拍照" = "Remote Camera";
"查找手环" = "Find Device";
"正在查找手环..." = "Finding device...";
"提醒功能" = "Reminder";
"语言设置" = "Language";
"跟随系统" = "Follow system";
"其他设置" = "Other Setting";
"抬腕亮屏" = "Wake on Wirst Raise"; //
"勿扰模式" = "Do Not Disturb";
"目标设置" = "Goal";
"微信运动" = "WeChat Movement";
"微信" = "WeChat";
"手环说明" = "Watch description";
"固件升级" = "Firmware upgrade";
"正在连接..." = "Connecting...";
"连接中..." = "Connecting...";
"重新连接" = "Reconnect";
"已连接" = "Connected";
"已断开" = "Disconnected";
"无连接" = "Not Connected";
"佩戴提示" = "Wear Reminder ";
"为了准确的测量数据，和不影响APP的正常使用，请您尽量日常佩戴手表。" = "In order to accurately measure the data and not affect the normal use of the app, please try to wear a watch every day.";
"配对成功" = "Pairing Successful";
"恭喜你，配对成功！" = "Congratulations, the pairing is successful! ";
"正在配对..." = "Pairing...";
"请勿操作手机和手表" = "Do not operate mobile phones and watches ";
"正在搜索..." = "Searching...";
"设备名称" = "Device name";
"搜索完成" = "Search complete";
"重新搜索" = "Search again";
"暂不配对" = "No pairing";
"可能原因" = "Possible Reason";
"1.距离太远，请将手表靠近手机；\n2.当前APP版本太低，请更新升级新版本后重试；\n3.您的手机此时存在短暂性网络通讯故障，请稍后重试；\n4.关闭蓝牙并删除当前已连接的蓝牙设备后，再次开启蓝牙重试；\n5.重启手表和手机后重试。" = "1. If the distance is too far, please put your watch close to your mobile phone;\n2. The current app version is too low. Please update the new version and try again;\n3. Your mobile phone has a transient network communication failure at this time, please try again later;\n4. Turn off Bluetooth and delete the currently connected Bluetooth device, turn on Bluetooth again and try again;\n5. Restart the watch and mobile phone and try again.";
"配对失败" = "Pairing failed ";
"配对失败，请重试" = "Pairing failed, please try again";
"为什么配对失败？" = "Why did the pairing fail?";
"重试" = "Retry";
"个人信息" = "Personal Information";
"头像" = "Avatar";
"昵称" = "Nickname";
"生日" = "Birthday";
"年龄" = "Age";
"修改昵称" = "Modify nickname";
"选择年龄" = "Choose the age";
"选择身高" = "Choose height";
"选择体重" = "Choose weight";
"相册选择" = "Photo album to choose";
"预览" = "Preview";
"使用" = "use";
"拍照" = "Take Photo";
"从手机相册选择" = "Select from Album";
"裁切" = "Intercept";
"使用此功能需要手环与手机保持连接，如果找到手环，手环会震动和亮屏" = "To use this function, the bracelet must be connected to the phone. If the bracelet is found, the bracelet will vibrate and brighten the screen.";
"来电提醒" = "Call Reminder";
"短信提醒" = "SMS Reminder";
"健康提醒" = "Health Reminder ";
"应用提醒" = "App Reminder";
"闹钟提醒" = "Alarm Reminder";
"已开启" = "On";
"未开启" = "Off";
"开启来电提醒" = "Turn on call reminder";
"手机来电时，手环会震动提醒" = "The wristband vibrates to remind you when your phone calls";
"开启短信提醒" = "Turn on SMS reminder";
"手机来短信时，手环会震动提醒" = "When a text message comes from the phone, the bracelet will vibrate to remind you";
"久坐提醒" = "Sedentary Reminder";
"提醒间隔" = "Reminder interval ";
"开始时间" = "Start Time";
"结束时间" = "End Time";
"喝水提醒" = "Drink Water Reminder";
"间隔时间" = "Interval Time";
"运动目标" = "Sports goal";
"每天步行" = "Walking steps per day";
"启动闹钟，设备将会震动提醒你，您最多可设置5个闹钟" = "Activate the alarm, the device will vibrate to remind you, you can set up to 5 alarms";
"您最多可设置5个闹钟" = "You can set up to 5 alarms";
"不重复" = "No Repeat";
"在此输入标签" = "Enter label here";
"删除" = "Delete";
"编辑闹钟" = "Edit Alarm";
"是否删除此闹钟？" = "Delete this alarm clock?";
"选择需要提醒的应用APP" = "Select the APP you want to be reminded of";
"时间单位设置" = "Time unit setting ";
"24小时" = "24-Hour";
"12小时" = "12-Hour";
"公英制单位设置" = "Metric and Imperial unit setting";
"公制(米/公里/千克)" = "Metric(m/km/kg)";
"英制(英寸/英里/英镑)" = "Imperial(inch/mile/pound)";
"温度单位" = "Temperature unit";
"摄氏度(℃)" = "Celsius (℃)";
"华氏度(℉）" = "Fahrenheit (℉)";
"开启抬腕亮屏" = "Turn on raising the wrist to brighten the screen";
"开启此功能，抬腕时手表将亮屏" = "Turn on this function, the watch will light up when you lift your wrist";
"开启勿扰模式" = "Turn on do not disturb";
"勿扰模式开启后，除闹钟和抬腕亮屏外，所有通知及来电不再自动亮屏提醒。" = "After turning on the Do Not Disturb mode, in addition to the alarm clock and the bright screen when you raise your wrist,All notifications and incoming calls will no longer automatically open the screen to remind you. ";
"发现新版本" = "New version found";
"更新" = "renew";
"正在升级中..." = "during upgrade...";
"当前已是最新版本" = "Currently the latest version";
"同步" = "sync";
"已同步" = "synced";
"同步中..." = "syncing...";
"注意事项：" = "Matters needing attention:";
"安装过程中，请勿离开本页面，请勿操作手机和手表，确保安装完成！" = "During the installation process, please do not leave this page, do not operate mobile phones and watches, to ensure that the installation is complete! ";
"xx人安装" = "How many people install";
"已绑定设备" = "Device already bound";
"手环信息" = "Bracelet information";
"电量" = "Electric quantity";
"解绑设备" = "Unbind Device";
"绑定设备" = "Bind Device";
"请先绑定设备" = "Please bind the device first";
"设备未连接" = "Device not connected";
"温馨提示" = "Warm Prompt";
"您的设置尚未保存，是否退出" = "Your settings have not been saved, whether to exit";
"详情" = "Details ";
"以后再说" = "later";
"立即更新" = "update now";
"正在拼命加载..." = "Loading desperately...";
"已是最新版本" = "Already the latest version";
"健康报告" = "Health report ";
"我的数据" = "My data ";
"个人资料" = "Personal data";
"隐私政策" = "Privacy Policy";
"APP检查更新" = "APP check for updates";
"关于" = "About";
"活动统计" = "Activity statistics";
"健康状况" = "Health";
"最高心率" = "Maximum heart rate";
"最低心率" = "Minimum heart rate";
"最高血氧" = "Maximum blood oxygen";
"最低血氧" = "Minimum blood oxygen";
"点击左侧减去或者增加按钮自定义卡片，上下拖动右侧图标对卡片进行排序。" = "Click the minus or add button on the left to customize the card, and drag the icon on the right up and down to sort the cards. ";
"快捷通讯" = "Quick communication";
"可以选定通讯录中的8个联系人，将其快捷方式显示在手表上。" = "You can select 8 contacts in the address book and display their shortcuts on the watch.";
"您最多可以添加8个联系人" = "You can add up to 8 contacts";
"搜索" = "Search";
"选择联系人" = "Select Contacts";
"联系人" = "Contacts";
"全部修改" = "Modify all";
"联系人数据传输中..." = "Contacts data transferring...";
"传输完成" = "Transfer complete";
"版本" = "version";
"周一" = "Mon";
"周二" = "Tue";
"周三" = "Wed";
"周四" = "Thu";
"周五" = "Fri";
"周六" = "Sat";
"周日" = "Sun";
"周天" = "Sun";
"天" = "days";
"小时" = "h";
"分钟" = "m";
"日均" = "Average Daily";
"我的总战绩" = "My total record";
"健走" = "walking";
"游泳" = "swimming";
"徒步" = "foot";
"椭圆训练机" = "elliptical trainer";
"健身车" = "exercise bike";
"踏步机" = "steppers";
"跑步机" = "treadmill";
"自行车" = "bicycle";
"登山" = "mountaineering";
"兵乓球" = "table tennis";
"羽毛球" = "badminton";
"瑜伽" = "yoga";
"跳绳" = "rope skipping";
"排球" = "volleyball";
"足球" = "football";
"篮球" = "basketball";
"跳舞" = "dance";
"提示" = "Alert";
"点击图片保存到相册" = "Click on the picture to save to the album";
"传输" = "Transmit";
"名片" = "Business Card";
"未识别到二维码" = "QR code not recognized";
"推荐" = "Recommend";
"安装" = "Install";
"安装中..." = "Installing...";
"安装完成" = "Complete";
"安装失败，请重试" = "Installation failed, please try again";
"将名片绑定至您的手表里，随时随地添加新朋友" = "Bind business cards to your watch and add new friends anytime, anywhere";
"绑定步骤：1.打开FaceBook，保存“我的二维码”到本地；2.打开YTWatch,进入设备-名片-FaceBook；3.点击上方二维码区域，添加或更换FaceBook二维码；4.点击下方绑定按钮，将二维码名片绑定至手表；注意事项：1.建议上传黑白颜色的二维码；2.请务必保持网络畅通；3.绑定过程中请将手表靠近手机，请勿操作手机和手表；4.确保手表电量充足。" = "Binding steps:1. Open FaceBook and save \"My QR Code\" locally;2. Open YTWatch and enter Equipment-Business Card-FaceBook;3. Click the QR code area above to add or replace the FaceBook QR code;4. Click the bind button below to bind the QR code business card to the watch;Precautions:1. It is recommended to upload a QR code in black and white;2. Please keep the network unblocked;3. Please keep the watch close to the phone during the binding process, and do not operate the phone and watch;4. Make sure the watch is fully charged.";
"请按以上步骤获取微信名片；注意：在上传二维码到YTWatch时，请务必按照上图所示，保证上传规范，否则将绑定失败！" = "Please follow the above steps to get the WeChat business card;Note: When uploading the QR code to YTWatch, please be sure to follow the above picture to ensure the upload specification, otherwise the binding will fail!";
"未识别到二维码" = "QR code not recognized";
"扫码连接" = "Scan Code To Connect";
"确定删除此背景吗？" = "Are you sure you want to remove this background?";
"最多只能添加9张图片" = "You can only add up to 9 pictures";
"请解除手机与手环的配对" = "Please remove the pairing of mobile phone and bracelet";
"解除配对后，手环可被其它手机绑定" = "After the pairing is released, the bracelet can be bound by other mobile phones";
"系统设置>蓝牙>点击绑定的蓝牙右侧的" = "Settings > Bluetooth > Click on the right side of the bound Bluetooth";
">忽略此设备" = "Forget This Devie";
"点我" = "Click here";
"正在拼命加载..." = "loading...";
"无法获取当前天气" = "No Weather Data";
"分钟min" = "min";
"(米/公里/千克)" = "(m/km/kg)";
"(英寸/英里/英镑)" = "(inch/mile/pound)";
"公制" = "Metric";
"英制" = "Imperial";
"是否解除绑定？" = "Unbind device?";
"绑定" = "Bind";
"绑定完成" = "Binding Completed";
"岁" = "";
"用户" = "User";
"多云" = "Cloudy";
"日均步数" = "Average Daily";
"请在“设置-隐私-相机”选项中,允许'YTWatch'访问你的相机" = "Please allow 'YTWatch' to access your camera in the “Settings-Privacy-Camera” option";
"请打开定位服务以获取您的运动轨迹" = "Please open the location service to get your motion track";
"请在“设置-隐私-照片“选项中,允许'YTWatch'访问你的照片" = "Please allow 'YTWatch' to access your photos in the “Settings-Privacy-Photos“ option";
"请在“设置-隐私-通讯录”选项中,允许'YTWatch'访问你的通讯录" = "Please allow 'YTWatch' to access your Contacts in the “Settings-Privacy-Contacts“ option";
"请在“设置-隐私-蓝牙”选项中,允许'YTWatch'使用蓝牙" = "Please allow 'YTWatch' to use Bluetooth in the \"Settings - Privacy - Bluetooth\" option";
"NFC名称" = "NFC name";
"封面颜色" = "cover color";
"录入模拟门卡" = "Enter the simulated door card";
"将非加密实体门卡模拟到穿戴设备上使用" = "The non-encrypted physical key card is simulated to be used on wearable devices";
"录入空白模拟卡" = "Enter blank analog card";
"线上录入空白卡，线下联系管理员" = "Enter a blank card online and contact the administrator offline";
"编辑卡片" = "Edit card";
"门卡" = "door card";
"门卡种类" = "Types of door cards";
"普通门卡" = "ordinary key card";
"异形门卡" = "Alien door card";
"门卡样式" = "door card style";
"仅供参考" = "for reference only";
"适用类型" = "Suitable type";
"使用门卡模拟功能，需要进行检测" = "Use the door card simulation function, need to detect";
"注意：\n1.支持录入频率为13.56MHZ的门禁卡（非加密卡完整录入，加入密卡需联系管理员并可识别的卡信息写入系统）\n2.带有卡功能的银行和储值消费、公交消费等功能的门卡暂时不能被模拟。即使模拟成功，这些卡片也不具备银行、公交等功能。\n3.因市面上门禁读卡器认证卡片的机制及标准不同，物业对卡片的权限管理也不同，所以无法确保卡片模拟成功后可以正常刷卡。如果多次尝试刷卡失败后建议使用实体门卡。" = "Notice:\n1. Support access control cards with an entry frequency of 13.56MHZ (complete entry of non-encrypted cards, to add an encrypted card, you need to contact the administrator and write identifiable card information into the system)\n2. Banks with card functions and door cards with functions such as stored value consumption and bus consumption cannot be simulated temporarily. Even if the simulation is successful, these cards do not have functions such as banking and public transportation.\n3. Due to the different mechanisms and standards of the access control card reader authentication card on the market, the property management of the card authority is also different, so it is impossible to ensure that the card can be swiped normally after the card simulation is successful. It is recommended to use a physical door card if several attempts to swipe the card fail. ";
"我已阅读并同意《用户协议》" = "I have read and agree to the User Agreement";
"添加门禁卡" = "Adding an Access Card";
"显示" = "show";
"色彩卡片" = "The color card";
"创意卡片" = "Creative CARDS";
"注意：\n步骤一：手机生成空白卡，此卡片支持录入门禁。\n步骤二：前往物业管理员，交给工作人员写入数据。" = "Notice:\nStep 1: The mobile phone generates a blank card, which supports access control.\nStep 2: Go to the property administrator and hand it over to the staff to write the data.";
"生成空白卡" = "Generate blank card";
"录入空白门卡" = "Enter a blank card";
"检测门禁卡" = "Detect access card";
"请将门卡贴于手机NFC感应区" = "Please paste the door card on the NFC induction area of the mobile phone";
"调整接触位置识别成功前请勿移走卡片" = "Do not remove the card until the contact position is adjusted and the recognition is successful";
"遇见问题" = "Encounter problems";
"请跳转到设置界面打开NFC功能" = "Please enter the settings interface to enable the NFC function";
"写入穿戴" = "Write wear";
"为什么读卡没反应？" = "Why is the card not responding?";
"1.卡片和手机感应区没对准，移动卡片找寻下感应区进行读卡。" = "1. The card and the mobile phone induction area are not aligned, move the card to find the lower induction area to read the card.";
"2.你的卡片不是13.56MHZ的频率，手机无法读取。" = "2. The frequency of your card is not 13.56MHZ, and the phone cannot read it.";
"为什么会提示卡片信息读取失败，请重试？" = "Why is it prompted that the card reading information failed, please try again?";
"读卡过程中手机和卡片通讯中断会导致读卡失败，请重新读卡，且读卡过程中请勿移动卡片" = "During the card reading process, the communication between the mobile phone and the card will be interrupted, resulting in the card reading failure. Please re-read the card, do not move the card during the reading process.";
"生成空白模拟卡" = "Generate blank analog card";
"正在生成..." = "Generate...";
"请找管理员写入数据，否则将会影响使用" = "Please administrator write data, otherwise it will affect the use of";
"卡包" = "Card bag";
"读取成功" = "Read Successful";
"读取失败" = "Read Failure";
"准备读取，请将卡片贴近手机" = "Ready to read, please put the card close to the phone";
"准备写入，请将卡片贴近手机" = "Ready to write, please put the card close to the phone";
"是否删除此门禁卡？" = "Delete this access card?";
"卡片名称" = "card name";
"请填写卡片名称" = "Please enter card name";
"请填写..." = "Please enter...";
"请先同意用户协议" = "Please agree the user agreement";
"我已阅读并同意" = "I have read and agree to the ";
"《用户协议》" = "User Agreement";
"内容" = "content";
"请输入内容" = "Please enter the content";
"常见问题" = "Common Problems";
"绑定微信运动前的准备" = "The things you need to do before binding WeRun";
"微信运动的绑定方法" = "WeRun binding method";
"怎么知道我的设备添加了微信运动？" = "How can I know that WeRun has been added into my device?";
"怎么删除微信运动？" = "How can I delete WeRun from my device?";
"我添加了微信运动，为什么手环（手表）的数据更新不了？" = "Why can I check the data updates immediately though WeRun is added?";
"每次使用微信运动都需要解绑设备或者忽略设备吗？" = "Do I need to sync the data by myself every time I refresh WeRun data?";
"1.解绑设备（苹果手机还需在系统蓝牙中忽略设备）\n2.开启手机蓝牙\n3.确保手表（手环）蓝牙是断开的\n\n" = "1. Unbind device（Apple users should ignore the device on Bluetooth）.\n2. Enable the Bluetooth on your phone.\n3. Make sure that the Bluetooth on YTWatch is disconnected.\n\n";
"1.本界面的图片已经存储于手机相册，打开微信'扫一扫'功能\n2.右上角选择'从相册选取二维码'\n3.找到存储于手机中的图片,识别二维码\n4.在弹出的页面中选择”绑定设备”，进入公众号，完成绑定。\n\n" = "1.The interface of the picture has been stored in the phone album, open WeChat Scan QR Code\n2. Choose QR Code from Album in the upper right corner\n3. Find the picture stored in the phone, identify the QR code\n4. In the page that is displayed, select Binding Device, enter the public number, and complete the binding.\n\n";
"关闭APP（苹果手机需要在蓝牙中忽略设备），打开微信运动可以看到设备是连接状态，说明你已经添加了微信运动。\n\n" = "1.    Exit YTWatch app（Apple users should ignore the device on Bluetooth.）.\n2.    Turn on WeChat-Me-Settings-Devices, if you see the device of MRD Sports connected, it indicates that you’ve added WeRun.\n\n";
"打开微信-我-设置-设备-选择设备-删除设备\n\n" = "Turn on WeChat-Me-Settings-Devices-Choose a device-Delete device";
"原因1：如果你微信运动绑定了手机或者其他的设备，微信运动只会显示数据最大的那一个.\n原因2：如果微信运动没有连接上设备，数据也同步不了\n\n" = "Reason 1：If your WeRun not only bind YTWatch, but also bind other devices like your phone, WeRun will only display the data of the device that has most steps.\nReason 2：If WeRun is not connected to your YTWatch, the data cannot be synced either.\n\n";
"1.不需要，只是在第一次添加微信运动的时候需要这样做，这样做是为了释放设备蓝牙，使微信可以搜索到设备。（如果设备已经被手机连上，微信运动是无法搜索到设备的）\n2.绑定微信运动后，APP和微信运动可以同时连接设备，互不影响。" = "1. No, it is for the first time that you need to do it. In this way, your device can be searched by WeRun successfully. (If the device has been bound with your phone, WeRun will fail to search for the device.)\n2. After binding WeRun, you can make YTWatch app and WeRun connected to the device at the same time without interference.";
"升级完成" = "Upgrade Complete";
"升级失败,请重试" = "Upgrade failed, please try again";
"正在升级中，请稍后..." = "Upgrading, please wait";
"设备已绑定" = "device is bound";
"分享成功" = "share success";
"分享失败" = "Failed to share";
"已保存到系统相册" = "Saved to system album";
"最高海拔" = "highest altitude";
"最低海拔" = "minimum altitude";
"未安装该应用" = "The app is not installed";
"步频(步/分钟)" = "Cadence (steps/min)";
"仰卧起坐" = "Sit-ups";
"俯卧撑" = "push ups";
"引体向上" = "pull up";
"动感单车" = "spinning bike";
"英尺" = "ft";
"英寸" = "in";
"英里" = "mi";
"英里/小时" = "mph";
"英里/分钟" = "miles/min";
"厘米" = "cm";
"分钟/公里" = "min/km";
"公里/分钟" = "km/min";
"户外跑步" = "outdoor running";
"室内跑步" = "indoor running";
"同步系统时间" = "Synchronize system time";
"同步失败" = "Sync failed";
"同步完成" = "Sync succeeded";
"海拔(英尺)" = "Altitude (ft)";
"单次最远距离(英里)" = "Single longest distance (mi)";
"单次最高爬升(英尺)" = "Single highest climb (ft)";
"累计距离(英里)" = "Cumulative distance (mi)";
"压力" = "pressure";
"梅脱" = "Metre";
"轻松" = "easy";
"正常" = "normal";
"中等" = "medium";
"偏高" = "high";
"压力范围" = "pressure range";
"平均值" = "average value";
"压力参考值" = "pressure reference";
"本周累计" = "Cumulative this week";
"本月累计" = "Cumulative this month";
"本年累计" = "Cumulative this year";
"每周平均" = "Weekly average";
"每月平均" = "monthly average";
"推荐梅脱" = "Metre recommended";
"推荐一周梅脱为：600-1000MET-min" = "The recommended one week MET is: 600-1000MET-min";
"什么是梅脱" = "What is Met";
"当活动强度达到中高等。且持续活动10分钟以上，则认为该次活动是有效活动，对人体健康有益。" = "When the activity intensity reaches medium to high. And continuous activity for more than 10 minutes, the activity is considered to be effective and beneficial to human health.";
"整点自动测量" = "Automatic measurement of the whole point";
"开启此功能，手表每小时将自动测量健康数据" = "When this function is turned on, the watch will automatically measure health data every hour";
"目标" = "target";
"写入成功" = "Write successful";
"写入失败" = "Write failed";
"钱包" = "Wallet";
"微信支付" = "WeChat Pay";
"支付宝" = "Alipay";
"收款" = "Collection";
"将收款二维码绑定至您的手表里，随时随地发起收款" = "Bind the payment QR code to your watch and initiate payment anytime, anywhere";
"二维码无法识别" = "QR code cannot be recognized";
"收款码" = "Receipt code";
"绑定步骤：\n1.打开微信，去微信支付页面保存收款码到手机本地;\n2.打开YTWatch,进入设备-钱包-微信支付；3.点击上方二维码区域，添加或更换微信收款二维码；4.点击下方绑定按钮，将二维码名片绑定至手表；\n\n\n注意事项：\n1.建议上传黑白颜色的二维码；\n2.请务必保持网络畅通；\n3.绑定过程中请将手表靠近手机，请勿操作手机和手表；\n4.确保手表电量充足；" = "Binding steps:\n1. Open WeChat and go to the WeChat payment page to save the payment code to the local phone;\n2. Open YTWatch and enter Device-Wallet-WeChat Payment;\n3. Click the QR code area above to add or replace the WeChat payment QR code;\n4. Click the bind button below to bind the QR code business card to the watch;\n\n\nPrecautions:\n1. It is recommended to upload a QR code in black and white;\n2. Please keep the network unblocked;\n3. Please keep the watch close to the phone during the binding process, and do not operate the phone and watch;\n4. Make sure the watch is fully charged;";
"保存收款码到手机本地" = "Save the receipt code to the phone locally";
"钱包绑定步骤" = "Wallet binding steps";
"绑定微信收款码步骤" = "Steps to Bind Wechat Receipt Code";
"请按以上步骤获取微信收款码；\n注意：在上传二维码到YTWatch时，请务必按照上图所示，\n保证上传规范，否则将绑定失败！" = "Please follow the steps above to obtain the WeChat payment code;\nNote: When uploading the QR code to YTWatch, please be sure to follow the picture above,\nMake sure to upload the specification, otherwise the binding will fail!";
"最新" = "Newest";
"数据" = "Data";
"简约" = "Simplicity";
"卡通" = "Cartoon";
"色彩" = "Color";
"商务" = "Business";
"样式" = "Style";
"位置" = "Position";
"版本更新" = "Version update";
"监测到你的手表当前使用的不是最新版本固件，为了不影响手表的正常使用，并给你带来更好的用户体验，请务必将手表更新至最新固件版本。" = "It is detected that your watch is not currently using the latest firmware. In order not to affect the normal use of your watch and bring you a better user experience, please be sure to update your watch to the latest firmware version.";
"去更新" = "To update";
"下载中..." = "downloading...";
"背景" = "Background";
"已安装" = "Installed";
"我的勋章" = "my medal";
"共2枚" = "2 pieces in total";
"单日10000步" = "10,000 steps per day";
"单日20000步" = "20,000 steps per day";
"单日30000步" = "30,000 steps per day";
"累计5万步" = "Accumulated 50,000 steps";
"累计10万步" = "Accumulated 100,000 steps";
"累计50万步" = "Accumulated 500,000 steps";
"累计100万步" = "Accumulated 1,000,000 steps";
"累计500万步" = "Accumulated 5,000,000 steps";
"累计1000万步" = "Accumulated 10,000,000 steps";
"连续7天10000步" = "10,000 steps for 7 days";
"连续21天10000步" = "10,000 steps for 21 days";
"连续100天10000步" = "10,000 steps for 100 days";
"胡夫金字塔" = "Pyramid of Cheops";
"埃菲尔铁塔" = "Eiffel Tower";
"广州塔" = "Guangzhou Tower";
"迪拜塔" = "Burj Khalifa";
"富士山" = "Mount Fuji";
"珠穆朗玛峰" = "Mount Everest";
"单日200千卡" = "200 kcal per day";
"单日500千卡" = "500 kcal per day";
"单日800千卡" = "800 kcal per day";
"累计1000千卡" = "Accumulated 1000 kcal";
"累计5000千卡" = "Accumulated 5000 kcal";
"累计10000千卡" = "Accumulated 10,000 kcal";
"累计2万千卡" = "Accumulated 20,000 kcal";
"累计5万千卡" = "Accumulated 50,000 kcal";
"累计10万千卡" = "Accumulated 100,000 kcal";
"环操场20圈" = "20 laps around the playground";
"环操场50圈" = "50 laps around the playground";
"环操场100圈" = "100 laps around the playground";
"北京五环路" = "Beijing Fifth Ring Road";
"青海湖" = "Qinghai Lake";
"塞浦路斯岛" = "Cyprus Island";
"台湾岛" = "TAIWAN Island";
"爱尔兰岛" = "ireland";
"马达加斯加岛" = "Madagascar";
"挑战2千米" = "Challenge 2 kilometers";
"挑战5千米" = "Challenge 5 kilometers";
"挑战10千米" = "Challenge 10 kilometers";
"挑战半马" = "challenge half marathon";
"挑战全马" = "Challenge the whole horse";
"累计10千米" = "Accumulated 10 kilometers";
"累计50千米" = "Accumulated 50 kilometers";
"累计100千米" = "Accumulated 100 kilometers";
"累计500千米" = "Accumulated 500 kilometers";
"累计1000千米" = "Accumulated 1000 kilometers";
"连续7天跑步" = "run 7 days in a row";
"连续21天跑步" = "run 21 days in a row";
"勋章详情" = "Medal Details";
"获得" = "get";
"暂未获得" = "Not yet available";
"里程" = "mileage";
"充电中" = "charging";
"删除设备" = "delete device";
"出厂设置" = "Factory settings";
"后台保护" = "Background protection";
"单日步数达到10000步" = "10,000 steps per day";
"单日步数达到20000步" = "20,000 steps per day";
"单日步数达到30000步" = "30,000 steps per day";
"累计步数达到50000步" = "Accumulated steps reached 50,000 steps";
"累计步数达到100000步" = "Accumulated steps reached 100,000 steps";
"累计步数达到500000步" = "Accumulated steps reached 500,000 steps";
"累计步数达到1000000步" = "Accumulated steps reached 1,000,000 steps";
"累计步数达到5000000步" = "Accumulated steps reached 5,000,000 steps";
"累计步数达到1000000步" = "Accumulated steps reached 10,000,000 steps";
"连续7天，每天步数达到10000步" = "10,000 steps per day for 7 consecutive days";
"连续21天，每天步数达到10000步" = "10,000 steps per day for 21 consecutive days";
"连续100天，每天步数达到10000步" = "10,000 steps per day for 100 consecutive days";
"累计爬升高度达到146.59米，相当于胡夫金字塔的高度" = "The cumulative climbing height reached 146.59 meters, which is equivalent to the height of the Pyramid of Khufu";
"累计爬升高度达到324米，相当于埃菲尔铁塔的高度" = "The cumulative climbing height reached 324 meters, which is equivalent to the height of the Eiffel Tower";
"累计爬升高度达到600米，相当于广州塔高度" = "The cumulative climbing height reaches 600 meters, which is equivalent to the height of Guangzhou Tower";
"累计爬升高度达到828米，相当于迪拜塔的高度" = "The cumulative climbing height reached 828 meters, which is equivalent to the height of the Burj Khalifa";
"累计爬升高度达到3776米，相当于富士山的高度" = "The cumulative climbing height reached 3776 meters, which is equivalent to the height of Mount Fuji";
"累计爬升高度达到8848米，相当于珠穆朗玛峰的高度" = "The cumulative climbing height reached 8848 meters, which is equivalent to the height of  Mount Everest";
"单日消耗热量达到200千卡" = "Consume 200 calories a day";
"单日消耗热量达到500千卡" = "Consume 500 calories a day";
"单日消耗热量达到800千卡" = "Consume 800 calories a day";
"累计消耗热量达到1000千卡" = "Cumulative calorie consumption reaches 1000 kcal";
"累计消耗热量达到5000千卡" = "Cumulative calorie consumption reaches 5000 kcal";
"累计消耗热量达到10000千卡" = "Cumulative calorie consumption reaches 10,000 kcal";
"累计消耗热量达到20000千卡" = "Cumulative calorie consumption reaches 20,000 kcal";
"累计消耗热量达到50000万千卡" = "Cumulative calorie consumption reaches 50,000 kcal";
"累计消耗热量达到100000千卡" = "Cumulative calorie consumption reaches 100,000 kcal";
"累计运动里程达到8千米，相当于环标准运动场20圈" = "The cumulative exercise mileage reaches 8 kilometers, which is equivalent to 20 laps around the standard sports field";
"累计运动里程达到20千米，相当于环标准运动场50圈" = "The cumulative exercise mileage reaches 20 kilometers, which is equivalent to 50 laps around the standard sports field";
"累计运动里程达到40千米，相当于环标准运动场100圈" = "The cumulative exercise mileage reaches 40 kilometers, which is equivalent to 100 laps around the standard sports field";
"累计运动里程达到99千米，相当于北京五环路的长度" = "The accumulated mileage reached 99 kilometers, which is equivalent to the length of the Fifth Ring Road in Beijing";
"累计运动里程达到360千米，相当于中国青海湖的周长" = "The accumulated mileage reached 360 kilometers, which is equivalent to the circumference of Qinghai Lake in China";
"累计运动里程达到648千米，相当于塞浦路斯岛的周长" = "Accumulated mileage of 648 kilometers, equivalent to the circumference of Cyprus";
"累计运动里程达到1139千米，相当于中国台湾岛的周长" = "The accumulated mileage reached 1139 kilometers, which is equivalent to the circumference of Taiwan Island, China";
"累计运动里程达到2797千米，相当于爱尔兰岛的周长" = "Accumulated mileage of 2797 kilometers, equivalent to the circumference of the island of Ireland";
"累计运动里程达到4828千米，相当于马达加斯加岛的周长" = "The accumulated mileage reached 4828 kilometers, equivalent to the circumference of Madagascar";
"单次跑步里程达到2千米" = "A single run of up to 2 kilometers";
"单次跑步里程达到5千米" = "A single run of up to 5 kilometers";
"单次跑步里程达到10千米" = "A single run of up to 10 kilometers";
"单次跑步里程达到21097.5米，相当于半程马拉松" = "A single running mileage reached 21097.5 meters, equivalent to a half marathon";
"单次跑步里程达到42.195千米，相当于全程马拉松" = "The mileage of a single run reaches 42.195 kilometers, which is equivalent to a full marathon";
"累计跑步里程达到10千米" = "Accumulated running distance reaches 10 kilometers";
"累计跑步里程达到50千米" = "Accumulated running distance reaches 50 kilometers";
"累计跑步里程达到100千米" = "Accumulated running distance reaches 100 kilometers";
"累计跑步里程达到500千米" = "Accumulated running distance reaches 500 kilometers";
"累计跑步里程达到1000千米" = "Accumulated running distance reaches 1000 kilometers";
"坚持连续7天跑步" = "Run for 7 days in a row";
"坚持连续21天跑步" = "Run for 21 days in a row";
"爬高" = "climb high";
"勋章" = "Medal";
"后台APP刷新" = "Background APP refresh";
"应用权限设置" = "App permission settings";
"系统运行保护权限" = "System operation protection authority";
"为了给你提供更加准确稳定的服务，不影响APP和设备正常使用，请你务必打开以上系统！" = "In order to provide you with more accurate and stable services without affecting the normal use of APP and devices, please be sure to turn on the above systems!";
"应用权限" = "App permission";
"APP使用权限" = "APP usage permission";
"为了不影响APP和设备正常使用，请你务必同意APP使用权！" = "In order not to affect the normal use of the APP and the device, please be sure to agree to the right to use the APP!";
"耗电保护" = "Power consumption protection";
"清理保护" = "Cleanup protection";
"消息通知权限" = "Message notification permission";
"自启动权限" = "Auto start permission";
"后台使用限制" = "Background usage restrictions";
"设备已断开" = "Device is disconnected";
"绑定步骤：\n1.打开" = "Binding steps:\n1. Open ";
"，保存收款码到手机本地；\n2.打开YTWatch,进入设备-钱包-" = "Save the receipt code to the phone locally; \n2. Open YTWatch and enter Device-Wallet-";
"，保存“我的二维码”到本地；\n2.打开YTWatch,进入设备-名片-" = " and save \"My QR Code\" locally;\n2. Open YTWatch and enter Equipment-Business Card-";
"；\n3.点击上方二维码区域，添加或更换" = ";\n3. Click the QR code area above to add or replace the ";
"二维码；\n4.点击下方绑定按钮，将二维码名片绑定至手表；\n\n\n注意事项：\n1.建议上传黑白颜色的二维码；\n2.请务必保持网络畅通；\n3.绑定过程中请将手表靠近手机，请勿操作手机和手表；\n4.确保手表电量充足。\n\n\n不会操作？" = " QR code;\n4. Click the bind button below to bind the QR code business card to the watch;\n\n\nPrecautions:\n1. It is recommended to upload a QR code in black and white;\n2. Please keep the network unblocked;\n3. Please keep the watch close to the phone during the binding process, and do not operate the phone and watch;\n4. Make sure the watch is fully charged.\n\n\nCan't operate? ";
"请按以上步骤获取" = "Please follow the above steps to get the ";
"注意：在上传二维码到YTWatch时，请务必按照上图所示，保证上传规范，否则将绑定失败！" = "Note: When uploading the QR code to YTWatch, please be sure to follow the above picture to ensure the upload specification, otherwise the binding will fail!";
"名片1" = " business card";
"共1" = "";
"枚1" = " pieces in total";
"绑定支付宝收款码步骤" = "Steps to Bind Alipay Receipt Code";
"绑定QQ收款码步骤" = "Steps to Bind QQ Receipt Code";
"绑定PayPal收款码步骤" = "Steps to Bind PayPal Receipt Code";
"三星" = "Samsung ";
"华为" = "Huawei ";
"小米" = "Xiaomi ";
"Android" = "Android ";
"iOS" = "iOS ";
"iPhone" = "iPhone ";
"vivo" = "vivo ";
"OPPO" = "OPPO ";